Close this search box.

Brama Integrated Amplifier


Description ▴

In a class of its own. With 350 Watts RMS of power per channel into 4-ohms (2-ohm stable), Brama Integrated Amplifier’s high-current, class AB lateral MOSFET output stage drives the most demanding loudspeakers with absolute conviction. What truly makes listening with Brama such a highly involving experience is not only its quantity of power, but its exceptional quality. Unraveling the finest nuances in your recordings in such a pure and effortless manner requires wide bandwidth design, advanced PCB layout and grounding, and careful component selection and matching. Heatsink temperatures and speaker output currents are continuously monitored and protected – so you only need to focus on long-term listening enjoyment.

Product Specifications ▾

AC Mains 100-125Vac or 200-250Vac, 50/60Hz (Transformer primaries are automatically switched based on the AC mains voltage detected)
Output Power (8-ohms) 200W RMS per channel
Output Power (4-ohms) 350W RMS per channel
THD+N (using solid-state linestage) < 0.1% (20Hz – 20kHz)
THD+N (using 300B DHT linestage) < 1% (20Hz – 20kHz)
Signal To Noise Ratio > 100dB
Input Impedance 100k ohm
Gain 18dB (low) / 24dB (med) / 32dB (high)
Balanced line-output impedance  < 100 ohms
Speaker Output Impedance < 0.01 ohms
IEC Jack Fuse 12A, Slow Blow (5x20mm)
Product Weight 85 lbs (38.5 kg)
Product Dimensions (including knobs, jacks, feet) 20.5″ width x 17″ depth x 5.75″ height (520mm x 430mm x 145mm)
Remote Dimensions 6″ x 2″ x 0.5″ (150mm x 50mm x 12.5mm)

Related Products